POWERFUL LED EMITTERS

NEWS


OptIntegral – An EU Horizon 2020 Project 01.02.2015 - OptIntegral – An EU Horizon 2020 Project

OptIntegral projecthas been launched to develop advanced LED advertising displays using in-mould hybrid integration of TOLAE (Thin, Organic and Large Area Electronics) and photonics components. The project will combine the intrinsic TOLAE benefits of thin lightweight bendable structures and in-mould integration with automated high reproducibility assembly, to produce a revolutionary optical design concept that brings better display resolution, lower costs and energy saving.

The aim of OptIntegral is to prove the viability of the technology, and demonstrate the flexibility, sustainability, and cost effectiveness of this revolutionary manufacturing process.  This should enable a wide range of diverse LED display products to be manufactured competitively within the EU labour market.

OptIntegral will initially develop three different large area display prototypes - 3D glasses-free, lightpipe and backlit - for retail, transportation and hospitality sectors.  These prototype displays will be manufactured and demonstrated by three European SME, and will be evaluated using recent developments in eye-tracking and EEG.  We expect the superior performance difference identified across both communication and metacommunication to facilitate the introduction of TOLAE based products into what are highly competitive markets.

In addition, three current LED Display Manufacturers in the EU will enlarge their portfolio to set up pilot manufacturing lines and co-develop demonstrators adapted to their customers’ needs.  The novel processesused in OptIntegral, combining Roll-to-Sheet and Roll-to-Roll manufacture of flexible electronics with In-mould hybrid integration of the optoelectronics within the optics,will open the way to a wide choice of materials and process designs.  This, along with a program of social impact evaluation, will be achieved during the 3 year timescale of the project, with the goal to be on the market with a sound, fully-supported business case one year after the end of the project.

OptIntegral: a three year project which started on 1st February 2015, has secured secure € 5,675,337 of European funding .   The consortium comprise nine European partners from 5 European countries including  Fundació Privada Ascamm (ASCAMM), Simulacions Optiques S.L.(SNELL) and Asociación Española de Normalización y Certificación (AENOR) from Spain, VTT Technical Research Centre of Finland (VTT) and Neonelektro Oy (NEO) from Finland, LumyComp Design Ltd. (LUMY) and Megatex Commerce Ltd.(MEGATEX) from Bulgaria,  Holografika Hologramelőállító Fejlesztő és Forgalmazó Kft.(HOLOGRAFIKA) from Hungary and University of Bath (UBATH) from the UK.  


LumyComp Design  has a status CREE LED Solution Provider 31.10.2013 - LumyComp Design has a status CREE LED Solution Provider

LumyComp Design has a status CREE LED Solution Provider


NEW CERTIFICATE FROM "TE CONNECTIVITY" FOR RESETTABLE LUMYCOMP PROTECTION MODULES 30.10.2013 - NEW CERTIFICATE FROM "TE CONNECTIVITY" FOR RESETTABLE LUMYCOMP PROTECTION MODULES


LumyComp design Ltd. take a part at Power Electronics conference/show in Moskow 27-29 November 2012 30.11.2012 - LumyComp design Ltd. take a part at Power Electronics conference/show in Moskow 27-29 November 2012

LumyComp design Ltd. take a part at Power Electronics conference/show in Moskow - Seminar: Power Supply Sources for LED Equipment. Economic and Technical Issues - A presentation of LumyComp :"Over-voltage protection modules for LED lamps based on new elements 2Pro AC by TE Connectivity". described the new protection modules series of 80W, 160W and 300W against any kind of over-voltage, short spikes protection against 10,000V / 5000 Amps and long-term (seconds and minutes) protection against up to 380-420VAC (or up to 600VDC)


Our new design : -55C deg. LED lamps for Far North application - publication in Canada. 23.11.2012 - Our new design : -55C deg. LED lamps for Far North application - publication in Canada.

Our new design : -55C deg. LED lamps for Far North application - publication in Canada.


New mega-LED light ceiling panel installed 20.11.2012 - New mega-LED light ceiling panel installed

The new designed 1600x1000mm LED panels with around 10,000 Lumen/140W are installed in a customer site.
(version with 20,000 Lumen is available for the same price).
Very smooth and absolutely no glaring, no dark lines and no any optical defect, strong LED light is obtained.
(giving absolutely NO-SHADOW and no glaring effect over the table surface).
New dimming option under design.
Vertical or horizontal options are available. Interior or exterior installation and different colors also available under request.
Several colored art-picture/photos advertisement variants are also available.
Also new modular version for reaching up to 3000x4000mm (10-12sq.m) and even more is under design.


LumyComp design Ltd. take a part at Electronica 2012 from 13 to 16th November 2012 at Messe München in Munich, Germany 17.11.2012 - LumyComp design Ltd. take a part at Electronica 2012 from 13 to 16th November 2012 at Messe München in Munich, Germany

LumyComp design Ltd. take a part at Electronica 2012 from 13 to 16th November 2012 at Messe München in Munich, Germany( International Trade fair for Electronic components, Systems and Applications), as a partner of worldknown company TE conectivity ,with our latest development in Anti-Lightning and OverVoltage protection fileld. Some of our latest development in LED lamps was shown at stands of our other partners, exibitors at Electronica 2012. Electronica is a leading European innovation platform for latest topics, trends and technologies.


Advanced Buit-In Anti-Lightning 80W up to 10kV (- Conforming standard : EN61643-11:2002 + A11:2007) and OverVoltage (constant 380-500VAC) protection 14.11.2012 - Advanced Buit-In Anti-Lightning 80W up to 10kV (- Conforming standard : EN61643-11:2002 + A11:2007) and OverVoltage (constant 380-500VAC) protection

Here is the result of our investigation for Anti-Lightning up to 10kV (- Conforming standard : EN61643-11:2002 + A11:2007) and OverVoltage (constant 380-500VAC) protection of our LED CREE Street lamps.

Designed by LumyComp Design with the support of TE Conectivity and with kindly help for measurement from TE Conectivity laboratories in France.


LumyComp design Ltd. take a part at fourth exhibition 11.11.2012 - LumyComp design Ltd. take a part at fourth exhibition " Inventions,technology,inovations - ITI 2012" Sofia 8-10 November 2012

Our company take a part with presentation of our inovative developments

It was fourth serial years that inventors, selectionists, designers, research-workers, scientists, contractors, industrialists and specialists in patents get together in Sofia within the bounds of organized from Union of inventors of Bulgaria exibition "Inventions,technology,inovations - ITI 2012" Sofia 8-10 November 2012 at тhe big marble hall of the Russian Cultural and Information Centre.


LumyComp design Ltd. take a part at Jubilee international congress 15.09.2012 - LumyComp design Ltd. take a part at Jubilee international congress "40 years Bulgaria - space country" 12-14 Sptember 2012 in Varna


First   « 1 2 »  Last